Riyadh · Dammam & Jubail · Jeddah · Dubai · Abu DhabiRFQs & tag schedules: rfq@tagarabia.com
  1. Home
  2. GCC UHF RFID Regulations

Standards guide

UHF RFID Frequency & Power Regulations in Saudi Arabia (CST) & UAE (TDRA)

Saudi Arabia and the UAE follow the European UHF RFID band, not the US one. Buying the wrong variant of a reader or tag is the most expensive mistake in GCC RFID projects.

865–868 MHzETSI EN 302 2082 W ERPLBT
Server racks in a data centre

The rules in one table

CST (Communications, Space & Technology Commission) was formerly CITC. Check the regulator's current technical specification when applying for type approval.
ParameterSaudi Arabia (CST) / UAE (TDRA)United States (FCC)
Band865–868 MHz902–928 MHz
Reference standardETSI EN 302 208FCC Part 15.247
Channelisation200 kHz channelsFrequency hopping, 50+ channels
Max power2 W ERP (~3.28 W EIRP)4 W EIRP
Spectrum etiquetteListen-before-talk / duty-cycle rules for high-power interrogatorsFrequency hopping

Why FCC hardware fails

A US-profile reader transmits outside the permitted band and at a higher power ceiling, so it cannot be type-approved or legally imported without ETSI test reports. Region-locked firmware is common, so a "global" reader bought from a US distributor may still be locked to FCC. Tags matter too: an FCC-tuned inlay still responds at 866 MHz, but its read range can drop sharply off its tuned frequency — the project then blames the reader.

Procurement check. Ask every reader, printer-encoder and antenna supplier for the ETSI (EU) variant part number and its CST / TDRA approval or ETSI EN 302 208 test report before the PO. Ask tag suppliers for read-range data measured at 865–868 MHz.

Practical design notes

  • Metal surfaces detune standard inlays: use on-metal PCB or ceramic tags on racks, machinery and cylinders.
  • Dense reader installations (portals, dock doors) must respect channel plans and LBT behaviour; plan reader placement with that in mind.
  • Handheld audits in data centres and hospitals typically read 2–6 m with ETSI handhelds; size teams and timelines on that, not on US brochure ranges.
  • Pre-encode tags and print the same ID as barcode/QR so sites without readers can still verify assets.

What TagArabia supplies

Only ETSI-band tags and ETSI-variant readers and printer-encoders, with encoding reports for your asset system. See UHF RFID asset tags.

Send your tag schedule or BOQ

Excel/CSV tag schedules, P&ID valve lists or FAR asset counts — priced against SAES, ASME A13.1, BS 1710 or your corporate FAR spec. Email rfq@tagarabia.com.

Request BOQ Quote