- Home
- Anodized Aluminum Asset Tags
Products · Asset identification
Metalphoto® & Anodized Aluminum Barcode / QR Asset Tags
The image is not printed on the surface — it is developed inside the aluminum and sealed under the anodic layer. That is why the barcode still scans after decades of Gulf sun, sand and cleaning chemicals.
Technical specification
| Parameter | Standard offer | Options |
|---|---|---|
| Substrate | Photosensitive anodized aluminum (Metalphoto® or equivalent) | Standard anodized aluminum with laser marking |
| Thickness | 0.5 mm (curved surfaces) or 0.8 mm | 1.0–1.5 mm for rigid nameplates |
| Sizes | 50 × 19, 50 × 25, 64 × 32, 75 × 38 mm | Custom to drawing |
| Data | Code 128, Code 39, QR, DataMatrix; sequential serials; logo | Variable data from your FAR export |
| Image | Silver-halide image sealed under the anodic layer (Mohs ~6 hardness) | Black on satin silver, or custom colours |
| Temperature | 260°C continuous; short exposure to 427°C | — |
| Adhesive / fixing | 3M VHB industrial adhesive | Two or four holes for rivets or screws |
| Outdoor life | 20+ years tested desert exposure, no UV fade | — |
Why it suits machine-read assets
Surface-printed polyester and painted aluminum lose contrast as UV and sand abrade the ink. A sealed image keeps its edge sharpness, so scanners keep reading narrow Code 128 bars and small QR modules. For fixed asset programs where a failed scan means a manual lookup in the register, that difference shows up in audit time.
| Material | UV fade | Abrasion | Barcode contrast | Outdoor life |
|---|---|---|---|---|
| Metalphoto® anodized aluminum | None | High | Highest | 20+ yrs |
| SS 316L laser-marked | None | Very high | Good (lower than Metalphoto) | 30–50+ yrs |
| Polyester / tamper-evident label | Moderate | Low | High when new | Indoor use |
Adhesive or mechanical?
3M VHB tape bonds well to clean, flat painted metal and plastics indoors and on shaded outdoor equipment. On textured castings, hot surfaces above the adhesive's rating, or where tags must survive pressure washing, specify holes and rivets or drive screws. Curved assets take 0.5 mm stock.
Washdown areas. Where chemical or high-pressure washdown dominates (process plots, food or pharma lines), the BOQ estimator moves the recommendation to laser-marked SS 316L.
Applications
- Fixed asset property tags for machinery, generators, HVAC units and vehicles
- Equipment nameplates and data plates with serial and rating data
- Outdoor utility assets: RMUs, transformers, telecom cabinets
- Calibration and maintenance tags linked to CMMS / IBM Maximo IDs
Indicative price: SAR 3.50–14.00 per tag depending on thickness, size, adhesive or holes, and quantity.