Riyadh · Dammam & Jubail · Jeddah · Dubai · Abu DhabiRFQs & tag schedules: rfq@tagarabia.com
  1. Home
  2. Stainless Steel 316L Tags

Products · Metal identification

Stainless Steel 316L Valve, Cable & Equipment Tags

The default outdoor tag for Gulf process plants: deep fiber-laser engraved or embossed SS 316L that does not fade, peel or soften in 80–90°C surface heat, chloride air or hydrocarbon washdown.

UNS S31603SAES-A-206 PMISAES-P-104
Stainless steel valve manifold with pressure gauges

Technical specification

Typical GCC supply specification. Final dimensions follow the approved tag schedule.
ParameterStandard offerOptions
MaterialSS 316L (UNS S31603), 2B or brushed finishSS 304 for indoor/dry areas only
Thickness1.2 mm (cable / small tags), 1.5 mm (valve, equipment)0.8 mm flexible cable strips; 2.0 mm heavy equipment plates
Shapes & sizesRound Ø38 / Ø50 mm; rectangular 75 × 25, 90 × 30, 100 × 50 mmAny size to drawing; radiused corners
MarkingDeep fiber-laser engraving (dark, permanent) or embossing / stampingChemical etch with paint fill; 2D DataMatrix / QR laser-marked
LegendTag number, service, line number, size; up to 4 linesSequential numbering from your schedule
FixingSS 316L ball chain, SS 316L wire loop, SS 316L cable tiesRivets, 3M VHB on flat equipment, banding clamps for small bore
TemperatureContinuous service above 800°C; melts ~1,400°C—
Outdoor life30–50+ years in desert UV and sand abrasion—

316L or 304 for Gulf sites?

Both are austenitic stainless, but 316L adds 2–3% molybdenum, which is what resists pitting from chlorides — salt-laden air on the Arabian Gulf and Red Sea coasts, cooling-tower drift and seawater service. The low carbon ("L") grade avoids sensitisation at welds. On coastal plots in Jubail, Ras Al-Khair, Jeddah or Abu Dhabi, 304 tags and fittings show tea staining and pitting within a few seasons; 316L is the grade engineering specs usually name for outdoor tags and their chains and ties.

PropertySS 304SS 316L
MolybdenumNone2–3%
Chloride pitting resistanceModerateHigh
Coastal / offshore useNot recommendedRecommended
Typical useIndoor plant rooms, dry inlandOutdoor process, coastal, offshore, hydrocarbon

Marking methods compared

Ink printing is not offered on outdoor stainless: it fades under Gulf UV.
MethodResultBest for
Fiber-laser engravingDark, permanent, high-resolution legend; deep engrave survives sand abrasionValve and instrument tags, serial numbers, 2D codes
Embossing / stampingRaised or recessed characters readable even when painted overCable tags, harsh mechanical areas, legacy specs
Chemical etch + paint fillRecessed legend with colour fillLarge equipment plates and logos

Standards and inspection

SAES-A-206 PMI. Where positive material identification applies, we supply mill certificates for the 316L sheet, chain and ties so the tags can be verified with the rest of the alloy components.

SAES-P-104. For outdoor cable identification in heavy industrial areas, SS 316L cable tags fixed with SS 316L cable ties replace adhesive and wrap-around markers, which peel in heat.

For pipes under 2" (52 mm), Saudi Aramco practice is an engraved or embossed metal tag clamped to the pipe rather than a stick-on marker — see the SAES tagging guide or check a line in the pipe marking calculator.

Applications

  • Valve tags from P&ID valve schedules (gate, globe, ball, check, control valves)
  • Instrument tags per SAES-J-004 instrument numbering
  • Outdoor cable and conduit markers on trays and junction boxes
  • Equipment and motor nameplates, pump and vessel ID plates
  • Small-bore piping clamp tags on process plots

Indicative price: SAR 15–45 per laser-engraved valve tag in medium batches, lower in bulk; SS cable marker sets SAR 12–28+. See the pricing guide.

Send your tag schedule or BOQ

Excel/CSV tag schedules, P&ID valve lists or FAR asset counts — priced against SAES, ASME A13.1, BS 1710 or your corporate FAR spec. Email rfq@tagarabia.com.

Request BOQ Quote